Dual-DVI - Full HD + 4x USB 2.0 + Audio CAT KVM-Extender-Set over IP, Mastereasy 8122-SET
- consists of 1x ME2L (8122L) and 1x ME2R (8122R)
masterEASY dual is a highly optimized KVM Extender over IP for distances up to 150m/492ft at a resolution of 1920x1200@60Hz and is available in copper. masterEASY dual KVM Extender convince by an ultra flat housing - 4 dual units in 1RU, have embedded sound and are compatible with standard network components. Video sharing, USB sharing, multihead.
For point to point connections or
ALL IN ONE GO - Matrix Switching Systems up to 56 endpoints without user system
BRIDGING - easy Switching without Switch
Easy Cross Move - Software feature
USB 2.0 in house development, USB save feature, USB emulation mode & USB sharing, masterEASY KVM extenders are also suitable for 24V systems
Feature - freeze last image (red frame), VGA transferred as DVI
<1.38ms latency with perfect video compression
masterEASY dual is a highly optimized KVM Extender over IP for distances up to 150m/492ft with a resolution of 1920x1200@60Hz and is available in copper. masterEASY convinces with an ultra flat housing - 4 dual in 1RU, embedded sound included and the KVM Extender over IP is compatible with standard network components.
The perfect video compression enables the low latency <1.38ms and therefore a delay-free transmission. USB and video are transmitted via a CAT5e/6/7 cable.
The in-house development of USB 2.0 transparent is extremely flexible and supports USB devices like tablets, touch screens, sound modules, printers. The USB upgrade supports USB sticks and USB hard drives. The kvm-tec feature "USB save" prevents the intrusion of viruses via the USB interface by deactivating mass storage devices. USB memory upgrade is pre-installed and can be activated. Feature - Freeze last image - in case of a signal failure the last saved image is displayed in a red frame.
Kvm-tec upgrades fOr MASTEReasy dual
(already pre-installed and activatable)
- USB Memory
- Sound analog in both directions in CD quality
ALL IN ONE GO
SWITCHINNG UP TO 56 ENDPOINTS
For smaller switching systems up to 56 endpoints.
No user system is required and EASYline is compatible with standard network components like all KVM extenders from kvm-tec. EASYline can also be used for point-to-point connections
FRONTBRIDGING
EASY SWITCHING WITHOUT SWITCH
With frontbridging, 2 Local KVM Extenders can be bridged to 1 remote dual KVM Extender (2 network sockets) and thus one or two monitors can simultaneously display the contents of the PCs with different images and can be operated either on the right or left.
2 local single Unit + 1 remote dual Unit = Bridging on 1 or 2 screens
BACKBRIDGING
EASY SWITCHING WITHOUT SWITCH
With backbridging it is possible to share from one dual local extender to two single remote extenders. For all applications that require monitoring at different locations
1 dual local Unit + 2 remote Units = Bridging or Sharing on 1 or 2 screens
EASY CROSS MOVE
SOFTWARE FEATURE
without switch both PCs can be operated with one mouse and one keyboard
2 local Units + 1 remote Unit = Easy Cross Move with 1 keyboard & 1 mouse
... more smart connections
- Automatic Plug & Play installation
USB transmission rate max 480Mbit/s
Firmware Flash upgrade without cable
VGA in - DVI out
DVI Extension without quality loss
4 Dual Extender in 1RU
2 years warranty, warranty extension to 5 years possible
We continue to stay transparent – kvm- tec diagnosis menu
In the diagnosis menu, the runtimes of the individual connected channels are displayed. Both Remote Unit and Partner Local Unit are listed. Additionally the information of the temperature in the FPGA of both units is displayed. Another feature is the cable test. In addition to the main data stream, test datas is transmitted and checked for errors. This process can be done during operation ( Main Link )
In the OSD menu, select the Features menu and press "C" to enter the diagnosis menu
Delivery content - Weight - Dimension
Delivery content - Local (CPU)
1 x ME2 local (CPU)
1 x wall power supply unit 12V 1A (EU-plug)
2 x DVI - DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
2 x VGA - DVI cable 1,8m/5.9ft (opt)
2 x Audio cable 1,8m/5.9 ft (opt)
4 x rubber feets
Quick Instruction
Delivery Content - Remote (CON)
1 x ME2 remote (CON)
1 x wall power supply 12V 1A (EU-plug)
4 x rubber feets
Weight & Dimension
108 x 43 x 107,5 mm
4.25 x 1.69 x 4,23 inch
295 g / 0.65 lb
Remote (CON): 108 x 43 x 107,5 mm
4.25 x 1.69 x 4,23 inch
295 g / 0.65 lb
Weight for Shipment
SET 1895 g /4.17 lb
(ME2-L 1005g/2.21lb / ME2-R 890g/1.96lb)
