USB 3.2 CAT Extender-Set USB-C to 4x USB 3.2 and 3.0 Device-Ports up to 100m, AV Access U3EX100

USB 3.2 CAT Extender-Set USB-C to 4x USB 3.2 and 3.0 Device-Ports up to 100m, AV Access U3EX100

U3EX100 is a new generation of USB 3.2 & USB 3.0 extender.
It supports USB 3.2 Gen 1 standard with up to 5Gbit/s USB data transmission rate, and is backward compatible with USB 3.0, USB 2.0, and USB 1.1 specifications.
This USB extender can extend the USB 3.2 & USB 3.0 data up to 100m/330ft via a single Cat 6A/7 F/FTP or U/FTP cable. It has a built-in 4-port USB hub in the receiver, which can be connected to multiple USB devices. Pure hardware architecture is compatible with Control / Bulk / Interrupt / Isochronous transmission protocols. For multiple USB device scenarios, this extender can also be used with an external USB 3.2 & 3.0 hub.
The transmitter can be powered by the USB Type-C host, and the receiver can be powered by the local power source. The extender supports USB VBUS pass-through, if the USB Host port of the transmitter is not connected to a host device, the USB Device ports on the receiver have no VBUS output.

Note: Such an extender cannot transmit a DP signal (DP alt mode etc.) and therefore cannot work with a USB graphics cable or a docking station.

External YouTube introductory video:



Features

• Slim profile, easy to install anywhere.
• Support USB 3.2 Gen 1 standard, and backward compatible with USB 3.0, USB 2.0, and USB1.1 standard.
• Supports up to 5Gbit/s data transfer rate.
• Support up to 100m transmission via Cat 6A/7 F/FTP or U/UFTP cable.
• One USB-C host port for connected to the laptop.
• Provide four USB 3.2 & 3.0 device ports on RX, including one 1.5A port for connecting high-power USB devices.
• Pure hardware architecture is compatible with Control / Bulk / Interrupt / Isochronous transmission protocols.
• Plug and play, no driver required, compatible with multiple operating systems.
• Support FW update via Micro-USB.

Package Contents

• Transmitter x 1
• Receiver x 1
• Power Adapter (DC 12V 3A) x 1
• USB Type-C to Type-C Cable (L=2m) x 1
• Mounting Brackets (with Screws) x 4
• User Manual x 1

Application

Specification

Technical
Input/Output Port	Transmitter: 1 x USB Host (USB Type-C); 1 X UTP Out; 1 x Update (Micro-USB) Receiver: 4 x USB DEVICE (USB Type-A); 1 X UTP In; 1 x DC 12V IN
USB Standard	USB 3.2 Gen1, and backward compatible with USB 3.0, USB 2.0, and USB 1.1 standards
Data Rate	Up to 5Gbit/s

 

General
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90%, non-condensing
ESD Protection	±8kV (Air-gap discharge)/ ±4kV (Contact discharge)
Surge Protection	Voltage: ±1 kV
Power Consumption (Max)	27.31W
Device Dimension (W x H x D)	Transmitter/Receiver: 115mm x 20.5mm x 100mm/4.53” x 0.81’’ x 3.94”
Product Weight	Transmitter/Receiver: 0.32kg/0.71lb

 

Transmission Distance Note:

Cable Type	Range
Cat 6a/7 (F/FTP or U/FTP) Cable	100m/330ft