4K60Hz HDMI CAT Transmitter expandable to up to 250 Displays, SC&T HE03T-4K6G

4K60Hz HDMI CAT Transmitter expandable to up to 250 Displays, SC&T HE03T-4K6G

Note: This is only the HE03T-4K6G transmitter. For operation, an HE03R-4K6G (with 1:1 extension) or several HE03R-4K6G receivers connected (via a managed LAN switch) are required for distribution.
The HE03R-4K6G is connected to one of the 2 x RJ45 out of an also available HE03LR-4K6G, the transmitter HE03T-4K6G or a GB switch.
The 4K6G system is not compatible with the HE03-4K system (without 6G).

HE03 4K6G is a 4K60Hz extender that can use a cost effective Ethernet cable to send the signal for up to 100M with resolution up to 4K@ 60 Hz 4:4:4. The built in EDID button can automatically find the connected HDMI monitor's best resolution and correctly display wanted video. The extender applies AV over IP technology that allow itself to work with Ethernet sw itches to split an HDMI to multiple ones, which can display one HDMI source on multiple displays at the same time.

HE03-4K6G Features

• Resolution up to 4K6 0Hz 4:4:4.
• Signal extension up to 100 M.
• Built in local loop out for an extra HDMI display at TX side.
• Supports audio extraction for microphones, headphones or speakers.
• Supports RS232 transmission and EDID management.
• Supports IR passthrough.
• Workable with SR01X (IP repeater) for longer distance.
• Workable with Ethernet switch for signal distribution.

Application Diagram

Point to Point application

Point to Multiple Points through network switch application

Note: in this application, auxiliary audio and IR are also supported.
 

I/O Interface

HE03T-4K6G

Item	Interface	Description
1	RJ45 Connector	To connect HE03R-4K6G/ HE03LR-4K6G
2	HDMI IN	To connect a HDMI source
3	HDMI LOOPOUT	To connect a HDMI display
4	Power Supply	To plug in DC 5V power adapter
5	Button	To select EDID
6	DIP Switch	EDID & RS232 Settings
7	RS232	FW update (needs 3.5mm jack cable to RS232)
8	IR Tx	To connect an IR emitter
9	Power/LINK	To indicate the status of Power and LINK

HE03R-4K6G

 

Item	Interface	Description
1	RJ45 Connector	To connect HE03T-4K6G
2	HDMI OUT	To connect a HDMI display
3	Power Supply	To plug in DC 5V power adapter
4	Button	Mode & Select button for additional settings
5	DIP Switch	RS232 settings
6	RS232	FW update (needs 3.5mm jack cable to RS232)
7	IR Rx	To connect a 3.5mm jack for an IR receiver
8	Audio Output Interface	To use an audio cable to connect with speakers or an amplifier (refer to audio connection)
9	Power/LINK	To indicate the status of Power and LINK

 

Package Includes

Item	Amount
HE03T-4K6G (Transmitter)	1 pc
HE03R-4K6G (Receiver)	1 pc
DC 5V2A Power Adapter	2 pcs
IR Emitter Cable	1 pcs

 

Technical Specification

	HE03-4K6G	HE03T-4K6G	HE03R-4K6G
	Compliance
Standard		HDMI 2.0 HDCP 2.2 USB 2.0/ 1.1/ 1.0
Max. Video Resolution		4K@60Hz
Max. Transmission Distance		100M over CAT5e
Audio Format		Pass-through
RS232 Baud Rate		115200bps
IR Support		20-60Khz, ±45°, 5M	20-60Khz, ±45°, 5M
	Ports & Interfaces
	Video Input	1 x HDMI Type-A	1 x RJ45
	Video Output	1 x RJ45	1 x HDMI Type-A
Video Loop-out		1 x HDMI Type A
	Analog Audio Output		Terminal Block 5-Pin
	IR	External Transmitter: 3.5mm Stereo Phone Jack: 20~60KHz / ±45° / 5M	External Receiver: 3.5mm Stereo Phone Jack 20~60KHz / ±45° / 5M
	RS232	1 x 3.5mm Phone Jack	1 x 3.5mm Phone Jack
	Power
	Power Supply	5V 2A	5V 2A
	Ambient Temperature
	Operation	-20 to 70°C
	Storage	-40 to 80°C
	Operating Altitude	2000m
	Humidity	Up to 95%

Ordering Information
HE03-4K6G 4K60Hz HDMI over CAT Extender-Set (Transmitter HE03T-4K6G + Receiver HE03R-4K6G)
HUE03T-4K6G 4K60Hz HDMI+DP+USB-C Switching-Transmitter
HE03R-4K6G 4K60Hz HDMI over CAT Receiver (1 x HDMI out)
HE03LR-4K6G 4K60Hz HDMI over CAT Splitter 1-in/3-out (1 x of that is HDMI out)