4K OSD schwitchable LAN Switching-Receiver, UNICLASS HX-131R with OSD
With these LAN switching modules, which support up to 4K and can be switched via OSD menu, you can control your computers or machines independently and inexpensively from many places.
No software needs to be installed for this.
The system supports up to 100 (T + R) modules.
All transmitters and receivers are simply connected to a manageable gigabit switch (VLAN with IGMP active).
If it needs to run across multiple GB switches, a 10 Gbps uplink between the GB switches is required. HDMI, USB 2.0, analogue audio, RS232 and possibly even IR signals are transmitted.
Possible modules:
HX-131TSK = Transmitter for computers with
single monitor out
HX-131R = Receiver for operator station with
single monitor
HX-231L = Transmitter for computer with
dual monitor out
HX-231R = Receiver for operator station with
dual monitor
This is an extremely reliable and fast LAN-based KVM extender system for industry (e.g. automation) and commercial use, which enables mutual access to your computer systems via multiple remote control consoles within a network.
The LAN KVM extender system enables monitor, keyboard, mouse, microphone, speakers and USB devices (touch screen, printer, USB sticks, etc.) to be detached using a single Cat.5 cable. Transmission can be up to 100 meters away from the GB switch.
However, the dual-head variant HX-231 requires two LAN cables to the GB switch.
Any distance can be transmitted over a gigabit network with 10GB uplink. Up to 100 ports (50x T and 50x R) can be used in a gigabit network. This system supports digital video resolution up to 4K 3840x1660 @30Hz / 1920x1080 @60Hz while maintaining near real-time video quality. In addition, the KVM extenders support a choice between graphics mode and video mode to suit your requirements. The graphic mode is optimized for graphic representations; while the video mode is best suited for a dynamically changing video stream. This system is best suited to equip workstations with alternating computer access in the office (noise reduction, etc.) and industry (machine control, etc.).
Functions:
The image construction is almost in real time (up to 60fps) with only 1 frame/sec. Latency. Therefore, this system is also suitable for the transmission of camera images and films. You can connect up to 1920x1080 pixels / Full HD (1080p), keyboard and mouse with all the special functions of their driver software, other USB devices (such as printers, memory sticks and much more), as well as speakers and microphones.
Use:
You can work on the remote consoles with perfect image quality at a reasonable price, supply your information displays, reach touch screens, and transmit audio and, if necessary, an infrared remote control. The respective user selects the computer via an OSD menu, which he calls up and operates using his keyboard. In the OSD menu, he sees all of the system-integrated computers and can access them for operation. He can also see whether another user is already assigned to the system and can still log in there.
Features:
- OSD menu for easy switching.
- Full HD 1080p 1920x1080 @60Hz.
- 4k 3840x1660 @30Hz.
- Low latency < 1 frame/sec.
- 4 x USB 2.0 ports for keyboard, mouse and other USB 2.0 devices (touchscreen, printer etc.) on the receiver.
- With audio & microphone transmission.
- Bidirectional RS232 transmission.
- Bidirectional IR transmission (optional emitter required).
- Transmitter with loop-through of the monitor signal (local video out).
- Distances of up to 100 meters via a CAT5/ 6/7 cabling to the GB switch.
- Simple computer selection (with assignment of names) via the OSD menu.
- Up to 50 single transmitters and 50 single receivers can be used in one network.
- Up to 25 dual transmitters (HX -231L) and 25 dual receivers (HX-231R) can be used in one network.
- This means that up to 100 monitor signals (transmitters and receivers) can be used in one system.
- HDMI transmission with HDCP/EDID/DDC2B in 1:1 quality with up to 1920x1080 and all possible gradations.
- Graphic mode and video mode can be selected.
- Supports almost all operating systems.
- No software installation necessary.
- Configuration (naming, etc.) via OSD menu without third-party software.
- CAT KVM Extender Over LAN.
Package contains:
- 1 x receiver module
- 1 x external power supply 100 ~ 240V AC, 50-60Hz to 9V / 2A DC
- 2 x table mounting plates
- 1 x serial cable RJ12 to DB9 plug
- English manual
Specifications
| Model No. |
HX-131T |
HX-131R |
| Component Units |
1 x HX-131T (Transmitter Unit) |
1 x HX-131R (Receiver Unit) |
| PC Selection |
|
OSD Menue |
| Connectors |
1 x HDMI Female (video in)
1 x HDMI Female (local video out)
1 x USB Port (Type B)
1 x Mic. Jack
1 x Speaker Jack
1 x IR input (for IR receiver)
1 x IR poutput (for IR emitter)
1 x RS232 serial port
1 x RJ45 |
1 x HDMI Female (video out)
4 x USB Port (Type A)
1 x Mic. In Jack
1 x Speaker Out Jack
1 x IR input (for IR receiver)
1 x IR poutput (for IR emitter)
1 x RS232 serial port
1 x RJ45 |
| LEDs |
1 x Power (Red) 1 x Link (Green) |
| LAN support |
1Gbps; bis zu 100.Ports /System
Bei einem Uplink sind mindestens 10 Gbps zwischen den Switches notwendig. |
| Switch Button |
2 x Momentary Switch
1 x rotary Dip Switch |
| DVI Video Resolution |
up to 4K 3840x2160 @30Hz
1920x1080 @60Hz/ Full HD 1080p |
| Operation Temperature |
0 ~ 40° |
| Storage Temperature |
-20 ~ 60° |
| Humidity |
0~90% RH, Non-condensing |
| Weight |
480g |
480g |
| Dimension (L x W x H) |
139 x 120 x 26 mm |
| Housing |
Metal enclosure |
| Power Adapter |
DC 9V / 2A |
| Safety / Emission |
FCC, CE |
B2B Product - Designed for use in a commercial environment.
